How about Process Indicators for Rod Grinder?

The performance characteristics of Fote machinery rod grinder: Caused by energy consumption, the grinding medium consumption, lining consumption slants big, etc. Rod grinding machine with grinding bar in line contact, so big of the material first by grinding, selective grinding effect, so the product particle size range is relatively narrow, uniform end product size, less crushing phenomenon, high grinding efficiency, moreover, Fote machinery is the production of rod mill with rubber lining, wear-resisting corrosion, long service life, has the ability of dry grinding of wet material, highly praise. And are you familiar with the process indicators of rod grinder?

Rod grinder, during the production process, characteristics: 1. To save power2. The discharging granularity is uniform and has higher yield3. Adjustable discharge fineness. And the precess indicators for rod grinding machines are as follows: 1 into the grain size of grinding materials: if into the grain size of grinding material, feed, the grinding hard, grinding mills’ output, low quality, low power consumption is big also.The biggest effectiveness, to better play to rod grinder in power plant desulphurization system, general into the grinding particle size of limestone material to control within the scope of the following: filling the limestone less than 20 mm, among them: less than or equal to 7 to 10 mm (80%).(recommended) 2 into the grinding material moisture: if the final moisture is too large, easy to make fine particle materials attached in the way of conveying pipe, and material balance will also impact on the system.In power plant desulfurization, generally for limestone materials into the ground moisture to control within the scope of the following: filling the limestone water temperature is less than 3%; 3 into the grinding material: if the final temperature is too high, will cause grinding mills’ cylinder body and bearing parts, high impact rod grinding machine long-term safe operation. At the same time, the grinding temperature is too high, also easy to cause the change of the chemical composition of materials and aging of rubber lining. Therefore, for the final temperature is not more than 35 ℃.

And we also have other mining machines, such as stone crusher plant, granite crusher and hammering machine and so on. If you have any other question or have an interest on our product ,you can write to us: info@sinoftm.com.

shaking table separation: http://www.fte-china.com/pro/shaking_table.html

About the Author

Product Specials